Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Schlage Lock Installation & Rekey in Ashburn: What to Know First
We install and rekey Schlage locks as an independent service provider in Ashburn, with most residential jobs completed same-day and commercial work scheduled within 24 hours. A standard Schlage deadbolt rekey runs $29-$49 per cylinder, and a full smart lock installation typically falls between $180-$340, with the exact price quoted in writing before we dispatch. Haven Standard Clause 1: the price on the phone is the price on the invoice. This page is for Ashburn homeowners and property managers who need Schlage-specific work done once, done correctly, and documented. Call (571) 410-8874 for a written estimate.
How Schlage Products Fail - and How We Fix Them
- Schlage Encode Plus smart lock (BE489WB) battery drain in Ashburn’s humidity swings. The Wi-Fi radio works harder when signal strength drops through older Broadlands townhome walls, and the firmware doesn’t always throttle correctly. We test signal strength at the door, quote a wired bridge or a Zigbee model if needed, and install with fresh lithium batteries rated for the actual load. The fix is quoted before we open the box.
- Schlage Connect (BE469ZP) touchscreen lag or ghost inputs after 3-4 years. The capacitive layer degrades with repeated use and the cleaning products most Ashburn households use. We diagnose whether it’s a firmware issue (resolved with a Z-Wave hub update) or hardware failure requiring a new touchscreen module. If the lock body is sound, we rekey the existing cylinder and replace only the failed component, not the entire assembly.
- Schlage B60N deadbolt cylinder rotation without bolt throw. The tailpiece cam shears inside after forced-entry attempts or improper installation alignment. We see this in Ashburn’s 2005-2015 build stock where original installs were rushed. We remove the cylinder, inspect the cam and bolt carriage, and replace with an OEM Schlage part or a Grade 1 equivalent if the customer wants the upgrade. Rekeying happens on the bench, not at the door.
- Schlage FE595 keypad lever lost programming after power interruption. The non-volatile memory fails in older units, particularly those installed in unconditioned spaces like garage entries in Ashburn Farm. We recover the lock if possible, factory reset if not, and rekey the cylinder to match existing keys or a new pinning chart. We also note whether the location needs a weatherized model going forward.
- Schlage AL-Series commercial lever cylinder extraction due to key breakage. The brass key stock used in original Schlage keys work-hardens over years of use in high-traffic Ashburn office buildings. We extract the broken key, inspect the plug for scoring, and either rekey the existing cylinder or replace it with a Schlage Everest or Primus upgrade if the security profile demands it. The photo record shows the extracted key and the plug condition before any decision.
Our Schlage Lock Installation & Rekey Process
- 1
Call and scope. A live person answers. We ask for the Schlage model number (printed on the lock edge or in your manual), the symptom, and the door material. We quote a firm price range before scheduling.
- 2
Dispatch with parts. The technician loads the van with the specific Schlage cylinder, tailpiece, or smart lock module the job requires. Daniel Novak keeps a running inventory of Schlage B-series deadbolts, FE-series keypads, and Encode smart locks based on Ashburn’s most common installations.
- 3
On-site diagnosis and photo record. We photograph the existing lock condition, test all functions, and confirm the written price before touching tools. The customer initials the scope.
- 4
Installation or rekey. For rekeys, we pin the cylinder to the new key code on the bench, test shear lines with a magnifier, and reinstall. For installations, we verify door prep dimensions (Schlage requires a 2-1/8″ bore and 1″ crossbore for deadbolts), adjust strike alignment, and confirm full bolt throw.
- 5
Function test and documentation. Every key tested in every position, every smart lock paired and verified, every code confirmed. The customer receives the photo record, the written invoice, and the 365-Day Done Right Promise card with the technician’s name and the Haven Standard clause cited.
What Schlage Lock Installation & Rekey Costs in Ashburn
| Service | Typical Range | What Affects Price |
|---|---|---|
| Schlage deadbolt rekey (per cylinder) | $29-$49 | Key quantity, high-security cylinder upgrade |
| Schlage lever/knob rekey | $29-$49 | Removable vs. fixed core design |
| Schlage smart lock installation (Encode, Connect) | $180-$340 | Door prep condition, Wi-Fi bridge needed, hub integration |
| Schlage deadbolt replacement + installation | $140-$280 | Grade 1 vs. Grade 2, finish grade, existing door condition |
| Broken key extraction + rekey | $85-$165 | Depth of break, plug damage, cylinder replacement needed |
Commercial master key systems and access control are surveyed and scheduled, with a flat per-lock price delivered in writing after walkthrough. There is no call-out surcharge added on arrival. Call (571) 410-8874 for an exact quote - estimates are free.
Why Ashburn Homeowners Call Novak Lock & Security Ashburn for Schlage Work
We’ve installed or serviced over 60,000 locks since 2002, and Schlage has been a steady share of that count. The 365-Day Done Right Promise applies to every Schlage rekey and installation - if the bolt binds, the keypad flakes, or the smart lock drops offline, we return and make it right. Our technicians carry Schlage, Kwikset, and Medeco inventory because Ashburn homes often mix brands across entry points, and matching keyways matters. The name on the invoice is the same name on the van. Background-checked, uniformed, with a documented photo record left at every job. Calls answered by a live person, 24/7.
FAQs
No. Rekeying a Schlage lock by a qualified technician does not void the mechanical warranty, which covers defects in materials and workmanship. The warranty does not cover wear from use, environmental damage, or improper installation. We document the lock’s serial number and original purchase date when available, and we use Schlage-compatible pinning kits that do not alter the plug geometry. If your lock is under warranty and has a genuine defect, we’ll note it in the photo record and advise on a manufacturer claim. Call (571) 410-8874 for an exact quote - estimates are free.
Most residential Schlage rekeys are completed same-day, often within two hours of your call. Commercial jobs and master key systems are scheduled, typically within 24 hours. We stock Schlage key-in-knob cylinders, deadbolt cylinders, and the most common pinning kits, so we don’t wait on parts. Call (571) 410-8874 for an exact quote - estimates are free.
Replace if the lock body is cracked, the bolt is worn to less than 1″ throw, or it’s a Grade 3 residential lock on a high-use door. Rekey or repair if the hardware is Grade 2 or better and the failure is isolated to the cylinder, latch, or tailpiece. We photograph the wear points and show you the condition before you decide. Call (571) 410-8874 for an exact quote - estimates are free.
We stock OEM Schlage cylinders, tailpieces, and smart lock modules. For some older discontinued lines, we source quality aftermarket equivalents that meet or exceed ANSI Grade 2 standards. We tell you which part we’re installing before we start, and the invoice lists the part by name and origin. Haven Standard Clause 1 applies either way: the quoted price does not change. Call (571) 410-8874 for an exact quote - estimates are free.
Only if the keyways are compatible, which they typically are not. Schlage uses the SC1/SC4 keyway, Kwikset uses KW1/KW10, and Medeco uses proprietary high-security blanks. We can install a Schlage lock with a Kwikset-compatible interchangeable core, or we can rekey all locks in the home to a single Schlage keyway. We carry Schlage, Kwikset, and Medeco inventory and will map the most efficient solution for your specific mix. Call (571) 410-8874 for an exact quote - estimates are free.
Written by Daniel Novak, Owner, Novak Lock & Security Ashburn at Novak Lock & Security Ashburn, serving Ashburn and nearby areas.